Flatlands Engineering Logo Meyers Manx Official UK Distributor Logo
 
  
Home Page Menu Button Chassis Restoration Menu Button Manxter 2+2 Page Menu Button Buggy Kits & Products Menu Button Location & Facilities Menu Button Contact Information Menu Button Gallery & Publications Menu Button
  
Manxter 2+2
 
Flatlands engineering are proud to announce they are now the sole UK distributor for the Meyers Manxter 2+2 dune buggy kit.

All kits are authorized by Meyers Manx USA and carry a UK identification plate and serial number. This fantastic looking car utilizes the standard length, unmodified VW beetle chassis and therefore does not have to be IVA tested when built. The Manxter is by far the best looking and nicest proportioned standard wheelbase dune buggy ever designed.

Safety is a big consideration in the Manxters design and unlike the traditional short wheelbase design, the rear seat passengers can now sit lower down at the same level as the driver within the confines of the cage structure. The Manxter also offers the option of front and rear seat inertia seat belt installations.

Manxter Picture 1Manxter Picture 2
Manxter Picture 3Manxter Picture 4

Manxter 2+2 Kit Price: £5400.00

  • Fiberglass Body in Solid Colour.
  • Fiberglass Bonnet.
  • Fiberglass Engine Cover.
  • Fiberglass Windscreen Surround.
  • Windscreen and Seal.
  • Fiberglass 4 Part Dashboard Assembly.
  • 6 Point Steel Roll Cage Assembly, Incorporating Steering Column Support, With All Mounting Brackets Welded and Pre-Drilled.
  • Steel Gearbox Mount and Tubular H Frame Incorporating Side Impact Bar Mounts, All Brackets Welded and Pre-Drilled.
  • Steel Side Impact Bars With All Brackets Welded and Pre-Drilled.
  • Meyers Manx Bonnet Emblem.
  • Build Manual.

Kit Options

Side Panel Package, Price: £425.00
  • Fiberglass Body Side Panels in Solid Colour.
  • Includes Stainless Steel Mounting Brackets.
  • All Stainless Steel Mounting Hardware Required to Complete Installation.
Hardtop Roof Package, Price: £500.00
  • Includes Fiberglass Molded Roof.
  • Alloy Front Hinge Brackets.
  • 2 Front Pivot Adaptors.
  • Centre Gas Strut Mount Plat.
  • 2 Gas Strut.
  • 4 Ball Socket Strut End.
  • 2 Strut Mount For Roll Cage.
  • Holding Latch.
  • Latch Pin Mount Plate For Roll Cage.
  • Cushion Strip for Roll Cage.
  • All Stainless Steel Mounting Hardware Required to Complete Installation.
Front Bumper Package, Price: £250.00
  • Includes Polished Stainless Steel Bumper Unit.
  • 2 Beam Mount Bracket.
  • Stainless Number Plate Mount.
  • All Stainless Steel Mounting Hardware Required to Complete Installation.
Rear Bumper Package, Price: £280.00
  • Polished Stainless Steel Bumper Unit Incorporating Meyers Manx Logo.
  • Upper and Lower Mounting Brackets.
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Manxter Picture 5Manxters steel 6-point cage system and side intrusion bars shown in-situ on the standard VW Beetle chassis.

The front and rear bumpers are shown attached. Please note that the bumpers supplied in the kit are fully polished.
Manxter Picture 6Cage structure is tied into the front axle beam and rear support frame via the side intrusion bars to give the Manxter excellent torsional rigidity properties for a vehicle of this type.

The front and rear bumpers are shown attached. Please note that the bumpers supplied in the kit are fully polished.
Manxter Picture 8Steel parts as supplied in the kit, all parts fully welded and all necessary brackets fitted and drilled as required for ease of assembly.
Manxter Picture 9Fibreglass parts as supplied in kit, all parts have a black flow-coat finish to the underside. Also shown are the optional side panels available separately.

Due to the Manxters simplicity of design and the use of many of the standard parts from the VW beetle donor vehicle, we feel that our kits can be built to a very high standard from our basic kit package with only basic hand tools and automotive knowledge, however having completed our demonstration car, we have now developed a comprehensive stock of kit build parts and packages specific to many areas of the build process to make our kits easier than ever to build. Package options and contents follow below.

Rear Seat Package, Price: £280
  • 2 Molded Fiberglass Seat Shells
  • 2 Body Side Brackets
  • Stainless Support Tube
  • 2 Machined Tube End Mounts
  • Central Chassis Support
  • 4 Seat Mount Clamp
  • 4 Rubber Buffer
  • 2 Chromed Brass Holding Latch
  • 2 Captive Plate For Latch
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Front Seat Package, Price: £325.00
  • 2 Molded Fiberglass Seat Shells
  • 2 Pairs of Stainless Steel Mount Wedges
  • 2 Dual Locking Seat Runner
  • 8 Mount Spacer
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Rear Seat Belt Package, Price: £295.00
  • 2 Adjustable Angle Inertia Belt Unit
  • 2 Inertia Unit Mount Bracket
  • Belt Socket Mount Plate
  • Under Body Cross Support
  • 2 Belt Clasp Stowage Hook
  • 2 Threaded Boss For Lower Cage Mount
  • 2 Alloy Body Spacer
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Front Seat Belt Package, Price: £150.00
  • 2 Inertia Belt Unit
  • 2 Threaded Boss For Upper Cage Mount
  • 2 Inertia Unit Mount Bracket
  • 2 Mount Bracket Lower Stress Plate
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Body Mount Kit, Price: £125.00
  • Floor pan Gasket
  • 2 Front Body Support Bracket
  • 2 Front Support Spacer
  • 2 Front Upper And Lower Frame Head Bolt Plate
  • Stainless Steel Oval Inner Tub Washers
  • Stainless Steel Lower Channel Stress Plates
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Roll Cage Installation Kit, Price: £55.00
  • Includes All Alloy Body Spacers
  • Lower Channel Stress Plates
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Steering Installation Kit, Price: £95.00
  • Modified Outer Column Tube (Exchange)
  • Bulkhead Adaptor Unit
  • Steering Stop Brackets
  • Upper Dash Mount Spacers
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Bonnet Mount Kit, Price: £125.00
  • Front Slip Hinge
  • 2 Aero Latches
  • 2 Stainless Latch Pin Mount Pedestal
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Windscreen Surround Mount Kit, Price: £45.00
  • 2 Captive Nut Plate
  • 2 Stainless Upper Mount Boss
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Dashboard Build Kit, Price: £80.00
  • 2 Glove Box Hinge
  • Glove Box Lock
  • Lock Striker Plate
  • Glove Box Opening Limiter
  • Upper Cover Mount Plates
  • Centre Molding Captive Nut Plate
  • Stainless Steel Gauge Panel
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Engine Cover Mount Kit, Price: £95.00
  • 2 Modified Stainless Hinge
  • 2 Gas Strut
  • 4 Ball Socket Strut End
  • 2 Strut to Body Bracket
  • 2 Strut to Engine Cover Bracket
  • 2 Adjustable Bump Stop Bracket
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Rear Body Strengthener Kit, Price: £45.00
  • 2 Stainless Struts
  • 4 Ball Socket Strut End
  • 2 Body Mount Bracket
  • 2 Rear Cradle Mount Bracket
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Rear View Mirror Kit, Price: £95.00
  • Top Quality Billet Alloy Mirror Head and Mount Bracket
  • Mounting Boss For Cage
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Lighting Accessories

Headlights, Price: £195 per Pair
  • Top Quality Stainless Steel Cases with Halogen Reflector Unit. Has Built In Sidelight.
  • Polished Custom Lower Mounts
  • Re-Positioned Reflector Unit
  • Optional Built in 21w Indicator Units For £55.00

Rear Lights
  • Genuine Hella Complete Units, £130.00 per Pair
  • Reproduction Complete Units, £50.00 per Pair
  • Flat New Beetle Style Complete Units, £40.00

Front Indicator Package, Price: £75.00
  • 2 Shaped L.E.D. Indicator Unit
  • 2 Stainless Cover Mount Plates
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Number Plate Light Kit, Price: £35.00
  • Very Neat Flush Fitting L.E.D. Light Unit
  • Stainless Steel Mounting Bracket
  • All Stainless Steel Mounting Hardware Required to Complete Installation.

Manxter Picture AAll UK Manxter 2+2 kits will be supplied in right hand drive configuration but left hand drive kits are available upon request.
Manxter Picture BAlthough the air cooled VW flat four power plant is without doubt the most popular choice for dune buggy construction, due to the growing popularity of the Subaru engine conversion we decided to fit the 2 liter EJ20 power plant to our demonstrator car. So which ever type of power plant you choose for your build, we can offer you help and advice based on our own practical experience of the conversion process.
Manxter Picture CTo compliment our kit packages we also offer a full chassis restoration service to your donor chassis, or we can supply outright a chassis to any specification or stage of completion required, all to show winning standard. See Chassis Restoration page for more information.
We also offer the option of fully built, turn key cars built to the highest standard. Prices start at £14,500, please feel free to contact us to discuss your requirements or to book a visit to our workshops to view our demonstrator car and any other ongoing projects in build stage.

Manxter Logo
Please contact us to place an order. We accept all major credit and debit cards including Visa, MasterCard, Switch, etc. All prices shown include VAT where applicable.

 
© 2004 - 2016 Flatlands Engineering All Rights Reserved Worldwide